Call now
Call now
Gas cooker installation and repair across Bristol by a Gas Safe registered engineer. Connected safely, tested properly, and certified.
Almost all of Julian's work comes from repeat customers and recommendations. Over forty years, that is the only measure that means anything.
Connecting a gas cooker is not a DIY job and it is not something a delivery driver can legally do. Any work on a gas appliance has to be carried out by a Gas Safe registered engineer, and a cooker is no exception.
Julian is Gas Safe registered, reg. 198984, and has been working on gas appliances in Bristol homes for over forty years. He installs new gas cookers, disconnects old ones, fits or moves the bayonet point, and repairs cookers that have stopped working properly.
Most cooker installations are quick, often under an hour where there is already a suitable gas point in the right place. Where the point needs moving or a new one running, it takes longer and is priced after a look.
Every installation is tested and left safe. That includes a tightness test on the connection, a check on the flame picture, and a look at the ventilation in the kitchen.
Fitted, moved or replaced so the cooker can be pulled out for cleaning.
Required on freestanding cookers, and the thing most often missed on a self-fit.
Kitchen refits often leave a room short on air without anyone realising.
Part of gas engineer services in Bristol.
Under the Gas Safety Regulations, anyone carrying out work on a gas appliance in this country must be on the Gas Safe Register. That covers connecting a new cooker just as it covers fitting a boiler.
It matters for practical reasons as well as legal ones. A badly made connection can leak, and a poorly set cooker can burn with an unstable or yellow flame, which produces carbon monoxide. Neither is obvious to look at.
A cooker also needs a stability bracket or chain fitted so it cannot tip forward when the oven door is open with weight on it. This is a requirement on freestanding cookers and one of the things most commonly missed on a self-fit.
Kitchen ventilation is part of the check. There has to be an openable window and, in many cases, adequate purpose-provided ventilation for the size of the appliance. If your kitchen falls short, Julian will tell you what is needed.
If you are a landlord, cooker work forms part of your legal duty and appears on the landlord gas safety certificate for the property.
Retailers will deliver a gas cooker and place it in the kitchen, but they will not connect it. Delivery drivers are not Gas Safe registered and connecting the appliance is not part of the service, which catches people out on delivery day surprisingly often.
It is worth arranging the connection in advance rather than after the cooker arrives, particularly if the old one needs disconnecting and moving out first. Measure the gap as well: replacement cookers are not always the same width or depth as the one coming out, and a bayonet point that sat neatly behind the old appliance can end up in the wrong place.
If you are having a kitchen refitted, get the gas point positioned before the units go in rather than working around them afterwards.
A burner that will not light, or lights and then goes out as soon as you release the knob, is usually the flame supervision device. That is the safety part that cuts the gas if the flame goes out, and it is a common failure on hobs that have had spills into the burner.
Yellow or orange flames instead of clean blue ones mean the burner is not getting enough air, often because the ports are blocked with grease or food. It needs attention rather than ignoring, because incomplete combustion is what produces carbon monoxide.
Uneven oven heat, an oven that will not hold temperature, or an ignition that clicks without lighting are all repairable faults. Whether it is worth repairing depends on the age and value of the cooker, and Julian will give you a straight opinion.
If you ever smell gas, turn the appliance off, do not use switches or naked flames, open windows and call the National Gas Emergency Service on 0800 111 999. That is a free 24 hour line. Julian does not offer emergency or out-of-hours callouts, so the emergency service is the right first call.
A bayonet point lets the cooker be pulled forward for cleaning without disturbing the gas. The flexible hose must be the correct type and length, routed so it cannot be trapped or heated. Hoses have a date stamp, and reusing an old one is a common shortcut.
Freestanding cookers need a bracket or chain fixed to the wall or floor, stopping the appliance tipping when weight is put on an open oven door. It is a requirement, and one of the things most often missed on a self-fit.
New units built around an existing cooker, a blocked airbrick, or a room extended and sealed up can all leave a kitchen short on air without anyone realising. Checked as part of the job.
Retailers deliver and place a gas cooker but will not connect it. Arrange the connection in advance, and measure the gap, since a replacement is not always the same size and the gas point can end up in the wrong place.
A few things are worth checking at the point of ordering rather than on delivery day, because they are the reasons an installation gets postponed.
Freestanding cookers, built-in hobs and built-under ovens do not all connect the same way. Gas hobs and electric ovens in the same unit are common now, and that combination needs an electrical supply in place as well as the gas point.
Range cookers in particular are frequently wider than the gap left for the old one. Measuring the opening, including any tiling or skirting, avoids a delivery that will not fit.
Kitchens need adequate ventilation for a gas appliance. In most homes this is already satisfied by an openable window and existing extraction, but a sealed room or a converted space is worth mentioning when you call.
An old cooker should be disconnected and the supply capped by a registered engineer rather than pulled off the bayonet and left. Where a supply is being abandoned entirely it must be capped correctly, not simply turned off at the tap.
No. Work on gas appliances must be carried out by a Gas Safe registered engineer. It is a legal requirement and a safety one.
Often under an hour where there is already a suitable gas point nearby. Moving or running a new point takes longer.
The old cooker can be disconnected and moved out safely. Let Julian know when booking if you want it removed entirely.
You get a record of the work and the safety checks carried out. Landlords need a full gas safety certificate covering all appliances.
Yes. Built-in hobs and freestanding cookers are both covered, provided the gas supply and ventilation are suitable.
One last practical point. If your existing cooker is being taken away by the retailer on delivery, it still needs disconnecting by a registered engineer first. Delivery teams will not do it, and they will not take an appliance that is still connected to the gas supply, so arrange that beforehand rather than on the day.
See also gas engineer, gas safety inspections, gas leak detection and landlord gas safety certificates. See the areas we cover.
Cooker installation covers Bristol and roughly ten miles around Staple Hill with no travel charge added. Call Julian on 07831 718509 before your delivery date rather than after it, and let him know whether there is already a bayonet point behind the old appliance.
Cookers are one part of what a registered engineer covers. Gas engineer services sets out the rest.
One thing that catches people out with a new kitchen. Retailers deliver cookers, they do not always connect them, and the delivery driver is very unlikely to be Gas Safe registered. Plenty of households end up with a new cooker standing in the kitchen unusable for a fortnight. If you are ordering, arrange the connection at the same time rather than after delivery, and check whether the old appliance is being taken away or left for you to deal with. Julian can do both in one visit.