Call now
Call now
Gas safety inspections across Bristol by a Gas Safe registered engineer. Every appliance and the pipework checked, with a clear written record.
Almost all of Julian's work comes from repeat customers and recommendations. Over forty years, that is the only measure that means anything.
A gas safety inspection is a check of every gas appliance in the property, the pipework feeding them, and the flues and ventilation that keep them burning safely. It is the same check a landlord is legally required to have done, available to homeowners too.
Julian is Gas Safe registered, reg. 198984, and has been inspecting gas installations in Bristol homes for over forty years. He covers boilers, gas cookers, hobs, fires and water heaters.
Homeowners most often book one when buying or selling a house, after inheriting a property, or when they have simply lost confidence in an installation someone else put in. Landlords book one because the law requires it every twelve months.
You get a clear written record at the end setting out what was checked and what was found, with anything that needs attention explained in plain language rather than jargon.
A homebuyer survey does not test gas appliances. An inspection before exchange does.
Blocked airbricks and concealed flues are the most common findings in older homes.
An analyser reports what is actually coming out. You cannot tell by eye.
Part of gas engineer services in Bristol.
The inspection starts at the meter with a tightness test on the whole installation. That establishes whether the system is holding pressure, which is the quickest way to identify a leak anywhere in the property.
Each appliance is then checked individually. Julian looks at the condition and stability of the appliance, confirms the gas pressure and rate are correct against the manufacturer figures, and examines the flame picture. A crisp blue flame is what you want to see.
A flue gas analyser measures what is actually coming out of the appliance. This is how a carbon monoxide problem is identified, and it is the part of the inspection that matters most, because carbon monoxide cannot be seen or smelled.
Flues are checked for condition, correct termination and adequate clearance. Ventilation is measured against what the appliances in that room require, which is a common shortfall in kitchens that have been refitted with new units built around an existing cooker.
Safety devices such as flame supervision are tested to confirm they shut the gas off as intended, and the visible pipework is inspected for corrosion, poor support and unsafe routing.
An inspection is a check rather than a repair. If something is found to be at fault, Julian will explain what it is, how serious it is and what the options are, and you decide what happens next. Where an appliance is immediately dangerous it has to be disconnected or capped on the spot, which is a requirement on every registered engineer rather than a judgement call.
Most inspections pass without issue. Where a fault is found, it is classified according to how serious it is, and you get told what it means rather than just handed a form.
A minor fault is one that does not make the appliance unsafe now but should be put right. You keep using the appliance, and the work can be booked at your convenience.
A more serious classification means the appliance is unsafe and should not be used until it is repaired. With your permission it will be turned off and labelled. An immediately dangerous situation means the appliance or supply has to be disconnected there and then, because leaving it running risks people in the property.
Julian will always explain exactly what has been found and why it matters. There is never pressure to have the remedial work done by him, and quotes for repairs are separate from the inspection so you can take your time.
For rented property, the inspection is issued as a landlord gas safety certificate, which you are legally required to hold and provide to your tenants.
Nothing is turned off without your agreement, and you will always be told what was found and why it matters before anything is done about it.
A homebuyer survey does not test gas appliances, so a property can pass with a boiler that is unsafe or an installation carried out by someone unregistered. An inspection before exchange costs very little against the price of the house.
Airbricks get blocked, covered by extensions or filled during draught-proofing. A room that had adequate ventilation thirty years ago may not have it now. The appliance has not changed, the room has.
Terminals too close to a window or boundary, sections concealed behind plasterboard with no inspection hatch, or older flues deteriorating where they pass through the roof. Concealed flues without access are a specific issue in properties converted in the 2000s.
The analyser measures what is actually coming out of the appliance. An appliance can look normal, with a flame that appears blue, and still produce carbon monoxide at levels that matter. There is no way to know by eye.
An inspection is not only for landlords. There are several situations where having the gas installation looked at by a registered engineer is a straightforwardly sensible thing to do.
You have no idea who worked on the appliances before you, or when. A survey done for a house purchase does not test gas appliances, and a great deal of unregistered work only comes to light when someone qualified finally looks at it.
If an appliance has been moved, a supply extended, or a kitchen refitted, it is worth confirming the result is sound. Pipework buried behind new units is difficult and expensive to reach later.
Symptoms of a carbon monoxide problem are easily mistaken for something else, and an appliance that has quietly deteriorated over years gives no obvious warning. An annual check removes the doubt.
A yellow flame, sooting, condensation, a smell when an appliance runs, or a pilot light that keeps going out. None of those should be lived with, and none of them are expensive to have looked at properly.
An inspection covers every gas appliance in the property rather than only the boiler. If you let the property out, the document you need is a landlord gas safety certificate, which is a legal requirement renewed every twelve months.
No. An inspection checks that appliances are safe. A boiler service goes further on the boiler itself, cleaning and adjusting it, and is what your manufacturer warranty requires.
Usually under an hour for a typical home with a boiler and a gas cooker. More appliances take a little longer.
No, it is only a legal requirement for landlords. Homeowners choose to have one for peace of mind, particularly when buying a property.
Every twelve months is the standard interval, and it is the legal requirement on rented property.
Someone needs to let Julian in and give access to every gas appliance, including any in outbuildings or garages.
If you are buying and the seller produces an existing certificate, check the date and who issued it. A record more than twelve months old tells you very little about the current condition of the appliances, and one issued by someone not on the Gas Safe Register tells you less than nothing.
See also landlord gas safety certificates, boiler servicing, gas leak detection and gas engineer services. See the areas we cover.
Inspections cover Bristol and roughly ten miles around Staple Hill with no travel charge added. Call Julian on 07831 718509 to book. Let him know how many gas appliances are in the property and whether any sit in a garage, outbuilding or loft, so the appointment is allowed enough time and nothing is missed on the day.
Not sure which of these you need? Gas engineer services covers the general call-out where something is wrong and you are not certain what.
A word on what the paperwork is and is not. A safety inspection tells you the condition of your appliances on the day they were checked. It is not a guarantee against future faults, and it is not the same document as a landlord certificate, which carries specific legal obligations attached to letting a property. Nor is it a boiler service, which maintains the appliance and protects the manufacturer guarantee. People frequently ask for one and need another, so it is worth describing your situation on the phone rather than naming a document.
Call Julian to book a check of every gas appliance in your property.