Call now
Call now
Boiler installation, replacement and central heating in Frenchay, from a Gas Safe registered engineer based nearby in Staple Hill.
Almost all of Julian's work comes from repeat customers and recommendations. Over forty years, that is the only measure that means anything.
Frenchay sits just north west of our base in Staple Hill. Julian has been fitting and repairing central heating across this part of Bristol for over forty years, and knows the area and its housing well.
He is Gas Safe registered, reg. 198984, and a Worcester Bosch accredited installer, so every new Greenstar boiler comes with up to a 12-year manufacturer guarantee. He also holds the unvented hot water and LPG qualifications.
Frenchay is a mix of period properties around the common and the older village, larger detached homes along Frenchay Park Road, and newer housing towards the hospital site and Begbrook.
The older houses around the common are the ones that need most care. Solid walls, high ceilings and large sash windows all lose heat quickly, so radiators sized from a standard chart come out too small and the room never quite warms up. Julian calculates the real heat loss room by room instead.
A straight swap is usually a single day, so heating and hot water are back on the same evening.
Strong mains-pressure hot water to several taps at once, ideal for larger Frenchay homes.
Annual servicing keeps your guarantee valid. Landlord CP12 certificates also available.
Boiler replacement makes up most of the work. A straight swap in the same position is usually a single day, so heating and hot water are back on the same evening. Relocating the boiler or converting from a cylinder system takes longer.
A full central heating installation takes four to five days. Boiler, radiators, pipework and controls are designed together, the system is flushed and dosed with inhibitor, and every radiator is balanced at the end.
Larger Frenchay homes often have two or more bathrooms. Where a combi would struggle, a system boiler with an unvented hot water cylinder delivers strong mains-pressure hot water to several taps at once.
Landlords can book their annual CP12 certificate, and Julian will arrange access with tenants directly if that is simpler. He works Monday to Friday 8am to 6pm and weekend mornings, and does not offer emergency or out-of-hours callouts.
Yes, including the area around the common, Frenchay Park Road and out towards Begbrook and the hospital site.
Not at all, but it needs proper heat loss calculations. Solid walls and high ceilings lose heat far faster than a modern house, and radiators sized from a chart come out too small.
A combi heats water for one outlet at a time by design. A system boiler with an unvented hot water cylinder gives strong mains-pressure hot water to several outlets at once.
A straightforward replacement is usually done in a day. A full central heating system takes four to five days depending on the size of your home.
Most combi boiler replacements start from around £2,000, depending on the boiler and your home. You get a clear, fixed quote before any work begins.
No. Julian works Monday to Friday 8am to 6pm and weekend mornings. If you smell gas, call the National Gas Emergency Service on 0800 111 999.
Solid walls, high ceilings and large sash windows all lose heat quickly. Radiators sized from a standard chart come out too small, so heat loss gets calculated room by room instead.
Larger properties, frequently with two or more bathrooms. This is where the unvented qualification earns its keep, since a cylinder rather than a combi is usually the right answer.
Well insulated and sealed from new. The constraint here is hot water capacity rather than heat loss, particularly in four bedroom family homes.
Several period houses have had a radiator added here and a bathroom there, all hung off pipework never sized for the extra load. The house heats unevenly and the boiler runs constantly. The fix is rarely a bigger boiler.
We also cover Fishponds, Staple Hill, Hambrook, Winterbourne and Downend. See all the areas we serve.
Because Frenchay has such a spread of property types, the unvented hot water qualification earns its keep here more than in most places. The larger detached houses along Frenchay Park Road frequently need a cylinder rather than a combi, and that work is legally restricted to engineers who hold the qualification. Julian does, alongside Gas Safe registration under reg. 198984 and Worcester Bosch accreditation.
Frenchay looks close to Staple Hill on a map, but the ring road and the M32 make the drive longer than the distance suggests. It makes no difference to the price, and it is worth knowing when you are arranging a time.
Frenchay is the clearest example of why Julian judges the patch by drive time rather than distance. On a map it looks like one of the closest places he covers. In practice the ring road and the M32 make it slower to reach than somewhere further out, which is worth knowing when you are booking rather than after.
Call Julian for a free, no-obligation quote on central heating or a new boiler in Frenchay.